High performance of printing quality is achieved by high precision printing table and squeegee unit of "TSP-1200"
X-Y Cleaning Unit for TSP-1200 is able to fit in many different production style with combination of 4 cleaning modes. Especially rotating wiper mode (hand wiping movement) wipes out solder balls on metal mask perfectly.
Touch switches for various operation. Quick and simple operations, including easy page change, improve operator's work efficiency.
NEW!!
with function of supporting date creation The software supports date creation."TSP-1200" is enable to create date by dialogue method. Set Up Support for Printing Support of setup procedure with program wikk realize drastically short setup time and uniform work level.
"TSP-1200" accomplished the cycle time approximately 13 seconds (optimum condition), applicable to many diggerent production style.
| Applicable PCBs | Dimensions |
Min.X50 x Y50 Max.X510 x Y460mm |
|---|---|---|
| Thickness | Min.0.4mm～Max.4.0mm | |
| Fixing |
Standard ： Edge clamp Option ： Vacuum |
|
| Applicable Metal Mask | Mask size |
X650 x Y550mm～X750 x Y750mm Option ： X800 x Y800mm |
| Mask origin | Center ・ Front | |
| PCB Transfer | Conveyor width adjustment | Manual (Option ： Automatic) |
| PCB supprt | Support pin plate (Option ： Jig)/td> | |
| Direction | Right→Left ・ Left → Right (Selection) | |
| Option | Function of checking the solder condition Ave. 0.45s/view | |
| Cycle time | Line cycle time | Approx. 13sec |
| Excluded the printing | Approx.9 sec. (including image recognition time) | |
| Printing | Direction | Front←→Rear |
| Squeegee speed | 1～220mm/sec | |
| Printing accuracy | Repeat position accuracy | Re±0.015mm |
| Appearance | Width | 1,200mm (1,860mm including conveyor) |
| Depth | 1,660mm | |
| Height | 1,400mm (Excluding signal tower) | |
| Weight | Approx. 1,100kg | |
| Power | AC 200V 3.2KVA Three phase | |
| Flow rate | 44NL/min | |
| Air source | Approx. 0.5MPa | |